Our Budget Forklift Safety Access Cage is a very cost effective unit but yet still made to a good standard. The safety cage, also known as a forklift access platform, is safer than a ladder and less expensive and quicker than scaffolding. It has a load capacity of 300kg and is suitable for 2 persons.

Included with our Budget Forklift Cage is a tool tray which sits within the 2 side bars. This can be folded back into the cage when not in use. The forklift cage is in a powder coated finish.

When in use, the forklift cage must be secured to the forklift. This budget safety cage has a sliding bolt which secures the forklift cage to the heel of the fork. This must be used when in use. The deck of the cage is formed from steel chequer plate to provide grip for the operators to stand on.

The back panel is covered with 50x50mm mesh to prevent any body parts from being caught in the forklift mast when being lifted. The door opens internally so no-one can fall out, and closes smoothly; automatically with a spring. A flick-over catch is also fitted for added protection to stop the forklift cage door accidentally being opened. The upper back section can be closed when not in use.

The Health and Safety Executive publishes guidance identifying appropriate working platform and forklift truck combinations and how they can be used safely together. This contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence.
Working Platforms Guidance

Optional Safety Harness

The optional safety harness ensures safe working at height and has a 1.8m fixed length rope lanyard. This safety harness conforms to EN 354, EN 361 and EN 358.

Please note, HSE Guidance Note PM28 states "If people have to lean out of the platform to carry out work, or there is a risk of falling out of the platform, they should use a personal work restraint system attached to an anchor point on the platform." For more information about HSE use of forklift access cages, please see link above in yellow box.

Please also note that Working At Height Regulations 2005 require equipment to be inspected at "suitable intervals", and BS EN 365:2004 Personal Protective Equipment Against Falls From Height state"To counter the causes of degradation listed in the Introduction, the British Standard states that components should be examined at least twelve-monthly"

Forklift Safety Access Cage Truck Compatibility

Our forklift safety cage is suitable for most forklift trucks with adjustable forks. The fork pockets are 200mm wide x 100mm high with the distance between the centre to centre of the forks of 815mm

Please note, Some Reach Trucks have narrow fork spacings, please check your truck!!!

For shipping we only charge what it costs us to deliver the platforms. We charge by the pallet to your postcode, which is calculated in the checkout - or you can collect for FREE from our premises in Kettering.

Click the button to view the delivery costs to your location.